View P460HVN011_7908344.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 1 / 32 model name: p460hvn01.1 issue date : 2013/02/06 ()preliminary specifications ( )final specifications customer signature date auo date approved by _________________________________ reviewed by pm director paley fang ____________________________________ reviewed by rd director eugene cc chen ____________________________________ reviewed by project leader mingyu wu ____________________________________ note prepared by pm travis huang ____________________________________
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 2 / 32 contents no contents record of revisions 1 general description 2 absolute maximum ratings 3 electrical specification 3-1 electriacl characteristics 3-2 interface connections 3-3 signal timing specification 3-4 signal timing waveform 3-5 color input data reference 3-6 power sequence 3-7 backlight specification 4 optical specification 5 mechanical characteristics 5-1 placement suggestions 6 reliability test items 7 international standard 7-1 safety 7-2 emc 8 packing 8-1 definition of label 8-2 packing methods 8-3 pallet and shipment information 9 precaution 9-1 mounting precautions 9-2 operating precautions 9-3 electrostatic discharge control 9-4 precautions for strong light exposure 9-5 storage 9-6 handling precautions for protect film 9-7 operating condition in pid application
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 3 / 32 record of revision version date page description 0.0 2012/09/11 first preliminary spec sheet release 0.1 2012/09/17 23 drawing update 24 drawing update 0.2 2012/10/22 22 panel weight update 0.3 2012/11/02 16 add input current max value 4.3a 23 drawing update 24 drawing update 17 correct pin13 from vdim to n.c. 0.4 2012/12/03 23 drawing update 2012/12/03 24 drawing update 22 bezel opening correct to 1018.28mm 22 bezel opening correct to 572.87mm 05 2012/12/17 23 drawing update 24 drawing update 1 2013/01/11 final edition release 1.1 2013/1/25 23 drawing update 24 drawing update 1.2 2013/2/6 19 correct gx from 0.320 to 0.300 19 correct gy from 0.620 to 0.605 1.3 2013/2/18 19 correct minimum value of brightness from 360 to 380 19 correct minimum value of cr from 2560 to 3200 19 correct maximum value of cr from 3200 to 4000
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 4 / 32 1. general description this specification applies to the 46.0 inch color t ft-lcd module p460hvn01.1. this lcd module has a tf t active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 46.0 inch. this modul e supports 1,920x1080 mode. each pixel is divided into red, gr een and blue sub-pixels or dots which are arranged in vertical stripes. gray scale or the brightness of the sub-pi xel color is determined with a 10-bit gray scale si gnal for each dot. the p460hvn01.1 has been designed to apply the 10-b it 2 channel lvds interface method. the main featur e of p460hvn01.1 would be high brightness, high contr ast, wide viewing angle, high color saturation, sup er narrow bezel, direct led backlight and high color depth. * general information items specification unit note active screen size 46.0 inch display area 1018.08(h) x 572.67(v) mm outline dimension 1023.68(h) x 578.27(v) x 37.5(d) mm 1 driver element a-si tft active matrix display colors 10 bit (8bit+frc), 1073.7m colors number of pixels 1,920x1080 pixel pixel pitch 0.53025 (h) x 0.53025(w) mm pixel arrangement rgb vertical stripe display operation mode normally black display orientation landscape/portrait enable surface treatment ag haze = 11% note: (1) dmax: 54.2mm (front bezel to driver cover); dmi n: 37.5mm (front bezel to bezel back)
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 5 / 32 2. absolute maximum ratings the followings are maximum values which, if exceede d, may cause faulty operation or damage to the unit item symbol min max unit conditions logic/lcd drive voltage vcc -0.3 14 [volt] note 1 input voltage of signal vin -0.3 4 [volt] note 1 operating temperature top 0 +50 [ o c] note 2 operating humidity hop 10 90 [%rh] note 2 storage temperature tst -20 +60 [ o c] note 2 storage humidity hst 10 90 [%rh] note 2 panel surface temperature pst 65 [ o c] note 3 note 1: duration:50 msec. note 2 : maximum wet-bulb should be 39 and no conde nsation. the relative humidity must not exceed 90% non-conde nsing at temperatures of 40 or less. at temperature s greater than 40 , the wet bulb temperature must not exceed 39 . note 3: surface temperature is measured at 50 dry condition
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 6 / 32 3. electrical specification the p460hvn01.1 requires two power inputs. one is employed to power the lcd electronics and to drive the tft array and liquid crystal. the second is employe d for led driver. 3.1.1 electrical characteristics value parameter symbol min. typ. max unit note lcd power supply input voltage v dd 10.8 12 13.2 v dc power supply input current i dd -- 0.9 1.08 a 1 power consumption p c -- 10.8 12.96 watt 1 inrush current i rush - - 5.5 a 2 permissible ripple of power supply input voltage (for input power=12v) v rp -- -- v dd * 5% mv pk-pk 3 input differential voltage O v id O 200 400 600 mv dc 4 differential input high threshold voltage v th +100 -- +300 mv dc 4 differential input low threshold voltage v tl -300 -- -100 mv dc 4 lvds interface input common mode voltage v icm 1.1 1.25 1.4 v dc 4 input high threshold voltage v ih (high) 2.7 -- 3.3 v dc cmos interface input low threshold voltage v il (low) 0 -- 0.6 v dc 7 backlight power consumption p bl -- 92.88 w life time(mttf) -- 50000 -- 8 3.1.2 ac characteristics value parameter symbol min. typ. max unit note receiver clock : spread spectrum modulation range fclk_ss fclk -3% -- fclk +3% mhz 9 receiver clock : spread spectrum modulation frequency fss 30 -- 200 khz 9 lvds interface receiver data input margin fclk = 85 mhz fclk = 65 mhz trmg -0.4 -0.5 -- -- 0.4 0.5 ns 10
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 7 / 32 note : 1. test condition: (1) v dd = 12.0v (2) fv = type timing, 60hz, 120hz or other (3) f clk = max freq. (4) temperature = 25 (5) test pattern : white pattern 2. measurement condition : rising time = 400us gnd gnd gnd gnd v vv v dd dddd dd 10% 90% 400 400400 400 s 3. test condition: (1) the measure point of v rp is in lcm side after connecting the system board an d lcm. (2) under max. input current spec. condition. 4. v icm = 1.25v v t h v t l |v id | v ic m g n d 0 v |v id | |v id | l v d s - l v d s + 5. do not attach a conducting tape to lamp connecting wire. if the lamp wire attach to conducting tape, tft-lcd module have a low luminance and the inverte r has abnormal action because leakage current occurs between lamp wire and conducting tape. 6. the relative humidity must not exceed 80% non-conde nsing at temperatures of 40 or less. at temperatures greater than 40 , the wet bulb temperat ure must not exceed 39 . when operate at low temperatures, the brightness of led will drop and t he life time of led will be reduced. 7. the measure points of v ih and v il are in lcm side after connecting the system board a nd lcm.
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 8 / 32 8. the lifetime (mttf) is defined as the time which luminance of the led is 50% compared to its origin al value. [operating condition: continuous operating a t ta = 252 ] 9. lvds receiver clock sscg (spread spectrum clock gen erator) is defined as below figures 1 11 1/ // /f ff f ss ssss ss fclk fclk fclk fclk_ __ _ss ssss ss( (( (max max max max) )) ) fclk fclk fclk fclk_ __ _ss ssss ss( (( (min min min min) )) ) fclk fclk fclk fclk 10. receiver data input margin rating parameter symbol min type max unit note input clock frequency fclk fclk (min) -- fclk (max) mhz t=1/fclk input data position0 trip1 -|trmg| 0 |trmg| ns input data position1 trip0 t/7-|trmg| t/7 t/7+|trmg | ns input data position2 trip6 2t/7-|trmg| 2t/7 2t/7+|trmg| ns input data position3 trip5 3t/7-|trmg| 3t/7 3t/7+|trmg| ns input data position4 trip4 4t/7-|trmg| 4t/7 4t/7+|trmg| ns input data position5 trip3 5t/7-|trmg| 5t/7 5t/7+|trmg| ns input data position6 trip2 6t/7-|trmg| 6t/7 6t/7+|trmg| ns rx1 rx0 rx6 rx5 rx4 rx3 rx2 rx1 rx0 rx6 rx2 rx3 trip1 trip0 trip6 trip5 trip4 trip3 trip2 v vv v diff diff diff diff = = = = 0 00 0v vv v 1/fclk=t lvds-rx input clock lvds-rx input data
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 9 / 32 3.2 interface connections lcd connector : 187059-51221(manufactured by p-two) ; pin symbol description pin symbol description 1 vcc 12v power supply 27 rxen1 lvds even pixel data input pair 1(-) 2 vcc 12v power supply 28 rxep1 lvds even pixel data input pair 1(+) 3 vcc 12v power supply 29 rxen2 lvds even pixel data input pair 2(-) 4 vcc 12v power supply 30 rxep2 lvds even pixel data input pair 2(+) 5 vcc 12v power supply 31 gnd gnd 6 gnd gnd 32 rxenclk lvds even pixel clock input pair(-) 7 gnd gnd 33 rxepclk lvds even pixel clock input pair(+) 8 gnd gnd 34 gnd gnd 9 gnd gnd 35 rxen3 lvds even pixel data input pair 3(-) 10 rxon0 lvds odd pixel data input pair 0(-) 36 rxep3 lvds even pixel data input pair 3(+) 11 rxop0 lvds odd pixel data input pair 0(+) 37 rxen4 lvds even pixel data input pair 4(-) 12 rxon1 lvds odd pixel data input pair 1(-) 38 rxep4 lvds even pixel data input pair 4(+) 13 rxop1 lvds odd pixel data input pair 1(+) 39 gnd gnd 14 rxon2 lvds odd pixel data input pair 2(-) 40 nc no connected 15 rxop2 lvds odd pixel data input pair 2(+) 41 reserved auo internal use only 16 gnd gnd 42 nc no connected 17 rxonclk lvds odd pixel clock input pair(-) 43 nc no connected 18 rxopclk lvds odd pixel clock input pair(+) 44 nc no connected 19 gnd gnd 20 rxon3 lvds odd pixel data input pair 3(-) 45 lvdsord select lvds data order: high or nc ns, low jeida 21 rxop3 lvds odd pixel data input pair 3(+) 46 nc no connected 22 rxon4 lvds odd pixel data input pair 4(-) 47 nc no connected 23 rxop4 lvds odd pixel data input pair 4(+) 48 nc no connected 24 gnd gnd 49 reserved auo internal use only 25 rxen0 lvds even pixel data input pair 0(-) 50 reserved auo internal use only 26 rxep0 lvds even pixel data input pair 0(+) 51 reserved auo internal use only note 1: all gnd (ground) pins should be connected t ogether and should also be connected to the lcd?s metal frame. note 2: all v dd (power input) pins should be connected together. note 3: all nc (no connection) pins should be open without voltage input.
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 10 / 32 lvds option = high/open ns b bb b 2 22 2 n a n an a n a d e d ed e d e d e d ed e d e b bb b 2 22 2 b bb b 3 33 3 b bb b 4 44 4 b bb b 5 55 5 n a n an a n a b bb b 3 33 3 r rr r 0 00 0 r rr r 5 55 5 g gg g 0 00 0 g gg g 0 00 0 r rr r 0 00 0 r rr r 1 11 1 r rr r 2 22 2 r rr r 3 33 3 r rr r 4 44 4 r rr r 1 11 1 g gg g 1 11 1 b bb b 0 00 0 b bb b 1 11 1 b bb b 1 11 1 g gg g 1 11 1 g gg g 2 22 2 g gg g 3 33 3 g gg g 4 44 4 g gg g 5 55 5 g gg g 2 22 2 c lo c k c lo c k c lo c k c lo c k c h x c h x c h x c h x _ __ _ 0 00 0 + ++ + c h x c h x c h x c h x _ __ _ 0 00 0 - -- - c h x c h x c h x c h x _ __ _ 1 11 1 + ++ + c h x c h x c h x c h x _ __ _ 1 11 1 - -- - c h x c h x c h x c h x _ __ _ 2 22 2 + ++ + c h x c h x c h x c h x _ __ _ 2 22 2 - -- - c h x c h x c h x c h x _ __ _ 3 33 3 + ++ + c h x c h x c h x c h x _ __ _ 3 33 3 - -- - c h x c h x c h x c h x _ __ _ 4 44 4 + ++ + c h x c h x c h x c h x _ __ _ 4 44 4 - -- - r rr r 6 66 6 b bb b 7 77 7 n a n an a n a n a n an a n a r rr r 6 66 6 r rr r 7 77 7 g gg g 6 66 6 g gg g 7 77 7 b bb b 6 66 6 r rr r 7 77 7 r rr r 8 88 8 b bb b 9 99 9 n a n an a n a n a n an a n a r rr r 8 88 8 r rr r 9 99 9 g gg g 8 88 8 g gg g 9 99 9 b bb b 8 88 8 r rr r 9 99 9 p re v io u s c y c le c u rre n t c y c le n e x t c y c le p re v io u s c y c le c u rre n t c y c le n e x t c y c le p re v io u s c y c le c u rre n t c y c le n e x t c y c le p re v io u s c y c le c u rre n t c y c le n e x t c y c le note: x = 1, 2, 3, 4? lvds option = low jeida b bb b 6 66 6 n a n an a n a d e d ed e d e d e d ed e d e b bb b 6 66 6 b bb b 7 77 7 b bb b 8 88 8 b bb b 9 99 9 n a n an a n a b bb b 7 77 7 r rr r 4 44 4 r rr r 9 99 9 g gg g 4 44 4 g gg g 4 44 4 r rr r 4 44 4 r rr r 5 55 5 r rr r 6 66 6 r rr r 7 77 7 r rr r 8 88 8 r rr r 5 55 5 g gg g 5 55 5 b bb b 4 44 4 b bb b 5 55 5 b bb b 5 55 5 g gg g 5 55 5 g gg g 6 66 6 g gg g 7 77 7 g gg g 8 88 8 g gg g 9 99 9 g gg g 6 66 6 c lo c k c lo c k c lo c k c lo c k r rr r 2 22 2 b bb b 3 33 3 n a n an a n a n a n an a n a r rr r 2 22 2 r rr r 3 33 3 g gg g 2 22 2 g gg g 3 33 3 b bb b 2 22 2 r rr r 3 33 3 c h x c h x c h x c h x _ __ _ 0 00 0 + ++ + c h x c h x c h x c h x _ __ _ 0 00 0 - -- - c h x c h x c h x c h x _ __ _ 1 11 1 + ++ + c h x c h x c h x c h x _ __ _ 1 11 1 - -- - c h x c h x c h x c h x _ __ _ 2 22 2 + ++ + c h x c h x c h x c h x _ __ _ 2 22 2 - -- - c h x c h x c h x c h x _ __ _ 3 33 3 + ++ + c h x c h x c h x c h x _ __ _ 3 33 3 - -- - c h x c h x c h x c h x _ __ _ 4 44 4 + ++ + c h x c h x c h x c h x _ __ _ 4 44 4 - -- - r rr r 0 00 0 b bb b 1 11 1 n a n an a n a n a n an a n a r rr r 0 00 0 r rr r 1 11 1 g gg g 0 00 0 g gg g 1 11 1 b bb b 0 00 0 r rr r 1 11 1 p re v io u s c y c le c u rre n t c y c le n e x t c y c le p re v io u s c y c le c u rre n t c y c le n e x t c y c le p re v io u s c y c le c u rre n t c y c le n e x t c y c le p re v io u s c y c le c u rre n t c y c le n e x t c y c le note: x = 1, 2, 3, 4?
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 11 / 32 3.3 signal timing specification this is the signal timing required at the input o f the user connector. all of the interface signal t iming should be satisfied with the following specifications for its proper operation. timing table (de only mode) vertical frequency range (60hz) signal item symbol min. typ. max unit period tv 1090 1125 1480 th active tdisp (v) 1080 th vertical section blanking tblk (v) 10 45 400 th period th 1030 1100 1325 tclk active tdisp (h) 960 tclk horizontal section blanking tblk (h) 70 140 365 tclk clock frequency fclk=1/tclk 50 74.25 82 mhz vertical frequency frequency fv 47 60 63 hz horizontal frequency frequency fh 60 67.5 73 khz notes: (1) display position is specific by the rise of de signal only. horizontal display position is specified by the ris ing edge of 1 st dclk after the rise of 1 st de, is displayed on the left edge of the screen. (2)vertical display position is specified by the ri se of de after a ?low? level period equivalent to e ight times of horizontal period. the 1 st data corresponding to one horizontal line after th e rise of 1 st de is displayed at the top line of screen. (3)if a period of de ?high? is less than 1920 dclk or less than 1080 lines, the rest of the screen dis plays black. (4)the display position does not fit to the screen if a period of de ?high? and the effective data per iod do not synchronize with each other.
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 12 / 32 3.4 signal timing waveforms th tdisp(v) tblk(v) tv de rgb data line n invalid data invalid data line 1 line 2 line 3 line n line 4 tclk clk de ch1 ch2 pixel m-7 pixel m-5 pixel m-3 pixel m-1 pixel m-6 pixel m-4 pixel m-2 pixel m invalid data invalid data pixel 1 pixel 2 pixel 3 pixel 5 pixel 4 pixel 6 pixel 7 pixel 8 pixel 9 pixel 10 pixel 11 pixel 12 pixel m-5 pixel m-3 pixel m-1 pixel m-4 pixel m-2 pixel m invalid data invalid data pixel 1 pixel 2 pixel 3 pixel 4 th tdisp(h) tblk(h) m m m m p p p p i i i i x x x x e e e e l l l l n l in e n l in e n l in e n l in e
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 13 / 32 3.5 color input data reference the brightness of each primary color (red, green and blue) is based on the 10 bit gray scale data in put for the color; the higher the binary input, the brighter th e color. the table below provides a reference for c olor versus data input. color data reference input color data red msb lsb green msb lsb blue msb lsb color r9 r8 r7 r6 r5 r4 r3 r2 r1 r0 g9 g8 g7 g6 g5 g4 g3 g2 g1 g0 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 blue(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(001) 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- red(1022) 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r red(1023) 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 ---- green(1022) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 g green(1023) 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 blue(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ---- blue(1022) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 b blue(1023) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 14 / 32 3.6 power sequence power sequence of lcd values parameter min. type. max. unit t1 0.4 --- 30 ms t2 0.1 --- 50 ms t3 450 --- --- ms t4 0 *1 --- --- ms t5 0 --- --- ms t6 --- --- --- *2 ms t7 500 --- --- ms t8 10 --- 50 ms t9 0 --- --- ms note: (1) t4=0 : concern for residual pattern before blu turn off. (2) t6 : voltage of vdd must decay smoothly after p ower-off. (customer system decide this value) pow er supply for lcd pow er supply for lcd pow er supply for lcd pow er supply for lcd vd d vd d vd d vd d (+ (+(+ (+ 12 1212 12 v vv v ) )) ) interface signal interface signal interface signal interface signal ( (( (lv ds data lv ds data lv ds data lv ds data & & & & clk clk clk clk ) )) ) backlight on backlight on backlight on backlight on / // /off offoff off control signal control signal control signal control signal ( (( (vblo n vblo n vblo n vblo n ) )) ) t1 10% 90% t3 t4 t5 t6 10% 90% 10% t7 g nd g nd valid d ata valid d ata valid d ata valid d ata t2 g n d cm o s interface signal cm o s interface signal cm o s interface signal cm o s interface signal g nd t8 t9
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 15 / 32 power sequence of backlight power input for blu (vddb) valid dimming control signal (v_ipwm,v_epwm) blu on/off enable (vblon) 24v(typ.) 10% 90% 90% t1 t2 t3 t4 t5 10% t6 t7 power input for blu (vddb) valid dimming control signal (v_ipwm,v_epwm) blu on/off enable (vblon) 24v(typ.) 10% 90% 90% t1 t2 t3 t4 t5 10% t6 t7 dip condition power input for blu (vddb) t8 vddb(typ.)*0.8 power input for blu (vddb) t8 vddb(typ.)*0.8 value parameter min typ max units t1 20 - - ms *1 t2 500 - - ms t3 250 - - ms t4 0 - - ms t5 1 - - ms t6 - - ms t8 - - 10 ms
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 16 / 32 3.7 backlight specification the backlight unit contains 120 pcs led. 3.7.1 electrical specification note 1 : dimming ratio= 100% (max) ta=255 , turn on for 45minutes note 2: measurement condition rising time = 20ms (v ddb : 10%~90%) and at dimming ration = 100% note 3: less than10% dimming control is functional well and no backlight shutdown happened spec item symbol condition min typ max unit note 1 input voltage vddb - 21.6 24 26.4 vdc - 2 input current i ddb vddb=24v -- 3.87 4.3 adc 1 3 input power p ddb vddb=24v -- 92.88 103.2 w 1 4 inrush current i rush vddb=24v - - 9.1 adc 2 on 2 - 5.5 - 5 on/off control voltage v blon off vddb=24v 0 - 0.8 vdc - 6 on/off control current i blon vddb=24v - - 1.5 ma - max 3.1 - 5.5 vdc - 7 dimming control voltage v_dim min vddb=24v - 0 - vdc - 8 dimming control current i_dim vddb=24v - - 2 madc - 9 internal dimming ratio dim_r vddb=24v 5 - 100 % - max vddb=24v 2 - 5.5 - 10 external pwm control voltage v_epwm min vddb=24v 0 - 0.8 vdc - 11 external pwm control current i_epwm vddb=24v - - 2 madc - 12 external pwm duty ratio d_epwm vddb=24v 5 - 100 % 3 13 external pwm frequency f_epwm vddb=24v 140 180 240 hz - hi open collector vdc - 14 det status signal det lo vddb=24v 0 - 0.8 vdc - 15 input impedance rin vddb=24v 300 kohm -
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 17 / 32 3.7.2 input pin assignment led driver board connector: ci0114m1hr0-nh (cvilu x) connector: ci0112m1hr0-nh pin symbol description 1 vddb operating voltage supply, +24v dc regulated 2 vddb operating voltage supply, +24v dc regulated 3 vddb operating voltage supply, +24v dc regulated 4 vddb operating voltage supply, +24v dc regulated 5 vddb operating voltage supply, +24v dc regulated 6 blgnd ground and current return 7 blgnd ground and current return 8 blgnd ground and current return 9 blgnd ground and current return 10 blgnd ground and current return 11 det blu status detection: normal : 0~0.8v ; abnormal : open collector 12 vblon blu on-off control: bl on : high/open (2v~5.5v); bl off : low (0~0.8v/gnd) 13 n.c. n.c. 14 pdim external pwm (5%~100% duty, open for 100%) < nc ; at internal pwm mode> pin symbol description 1 vddb operating voltage supply, +24v dc regulated 2 vddb operating voltage supply, +24v dc regulated 3 vddb operating voltage supply, +24v dc regulated 4 vddb operating voltage supply, +24v dc regulated 5 vddb operating voltage supply, +24v dc regulated 6 blgnd ground and current return 7 blgnd ground and current return 8 blgnd ground and current return 9 blgnd ground and current return 10 blgnd ground and current return 11 nc no connection 12 nc no connection
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 18 / 32 (note*) if external pwm function includes 5% dimmin g ratio. judge condition as below: (1) backlight module must be lighted on normally. (2) all protection function must work normally. (3) uniformity and flicker could not be guaranteed
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 19 / 32 4. optical specification optical characteristics are determined after the unit has been ?on? and stable for approximately 45 minutes in a dark environment at 25c while panel is placed in t he default position. the default position is t-con side as the top side of panel. the value specified is at an approxi mate distance 50cm from the lcd surface at a viewin g angle of and equal to 0. fig.1 presents additional information concerning th e measurement equipment and method. values parameter symbol min. typ. max unit notes contrast ratio cr 3200 4000 -- 1 surface luminance (white) l wh 380 450 -- cd/m 2 2 luminance variation white(9p) -- -- 1.33 3 response time (g to g) t -- 6.5 -- ms 4 color gamut ntsc 72 % color coordinates red r x 0.640 r y 0.330 green g x 0.300 g y 0.605 blue b x 0.150 b y 0.050 white w x 0.280 w y typ.-0.03 0.290 typ.+0.03 viewing angle 5 x axis, right( =0) r -- 89 -- degree x axis, left( =180) l -- 89 -- degree y axis, up( =90) u -- 89 -- degree y axis, down ( =270) d -- 89 -- degree sr3 or equivalent
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 20 / 32 note: 1. contrast ratio (cr) is defined mathematically as : surface luminance of l on5 contrast ratio= surface luminance of l off5 2. surface luminance is luminance value at point 5 across the lcd surface 50cm from the surface with a ll pixels displaying white. from more information see fig 2. when lamp current i h = 11ma. l wh =lon5 where lon5 is the luminance with all pixels displaying white at c enter 5 location. 3. the variation in surface luminance, white is defined (center of screen) as: white(9p) = maximum(l on1 , l on2 ,?,l on9 )/ minimum(l on1 , l on2 ,?l on9 ) 4. response time t is the average time required for display transition by switching the input signal for five luminance ratio (0%,25%,50%,75%,100% brightness mat rix) and is based on f v =60hz to optimize. target measured response time 0% 25% 50% 75% 100% 0% 0% to 25% 0% to 50% 0% to 75% 0% to 100% 25% 25% to 0% 25% to 50% 25% to 75% 25% to 100% 50% 50% to 0% 50% to 25% 50% to 75% 50% to 100% 75% 75% to 0% 75% to 25% 75% to 50% 75% to 100% start 100% 100% to 0% 100% to 25% 100% to 50% 100% to 75% 4. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determine d for the horizontal or x axis and the vertical or y axis wit h respect to the z axis which is normal to the lcd surface. for more information see fig4. fig. 2 luminance 1 2 3 4 5 6 7 8 h v h/6 h/2 v/2 v/6 9
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 21 / 32 fig.3 response time the response time is defined as the following figur e and shall be measured by switching the input sign al for ?any level of gray(bright) ? and ?any level of gray(dark )?. any level of gray (bright) any level of gr ay (dark) any level of gray (bright) t (r) 0%, 25%, 50%, 75%, 100% photodetector output time t (f) 0%, 25%, 50%, 75%, 100% 0%, 25%, 50%, 75%, 100% fig.4 viewing angle
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 22 / 32 5. mechanical characteristics the contents provide general mechanical character istics for the model p460hvn01.1. in addition the f igures in the next page are detailed mechanical drawing of th e lcd. horizontal (typ.) 1023.68 mm vertical (typ.) 578.27mm outline dimension depth (typ.) 37.5 mm horizontal (typ.) 1018.28 mm bezel opening area vertical (typ.) 572.87 mm horizontal 1018.08 mm active display area vertical 572.67 mm weight 13500g 5.1 placement suggestions: the suggestion placement is as following: 1. landscape mode: the default placement is t-con s ide as the top side. 2. portrait mode: the default placement is t-con si de has to be placed in the right side via viewing f rom the front. landscape ( front view ) portrait ( front view ) - t-con - t-con
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 23 / 32 front view
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 24 / 32 back view
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 25 / 32 6. reliability test items test item q?ty condition 1 high temperature storage test 3 60 , 500hrs 2 low temperature storage test 3 -20 , 500hrs 3 high temperature operation test 3 50 , 500hrs 4 low temperature operation test 3 -5 , 500hrs 5 vibration test (non-operation) 3 wave form: random vibration level: 0.5g rms bandwidth: 10-300hz, duration: x, y, z 30min per axes x,y,z : horizontal, face up 6 shock test (non-operation) 3 shock level: 10g waveform: half since wave, 11ms direction: x, y, z, one time each direction 7 vibration test (with carton) 1 (pkg) random wave (1.05g rms, 10-200hz) 10mins per each x,y,z axes 8 drop test (with carton) 1 (pkg) drop height: 17.8 cm, surround four flats and bottom flat twice. (astmd4169-i)
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 26 / 32 7. international standard 7.1 safety (1) ul 60950-1, ul 60065; standard for safety of i nformation technology equipment including electrical business equipment. (2) iec 60950-1 : 2001, iec 60065:2001 ; standard for safety of international electro technical commission (3) en 60950 : 2001+a11, en 60065:2002+a1:2006; eu ropean committee for electro technical standardization (cenelec), european standard for sa fety of information technology equipment including electrical business equipment 7.2 emc (1) ansi c63.4 ?methods of measurement of radio-noi se emissions from low-voltage electrical and electrical equipment in the range of 9khz to 40ghz. ?american national standards institute(ansi), 1992 (2) c.i.s.p.r ?limits and methods of measurement of radio interface characteristics of information technology equipment.? international special commit tee on radio interference. (3) en 55022 ?limits and methods of measurement of radio interface characteristics of information technology equipment.? european committee for elect ro technical standardization. (cenelec), 1998
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 27 / 32 8. packing 8-1 definition of label: a. panel label: *xxxxxxxxxxxx -xxxx * green mark description (1) for pb free product, auo will add for identification. (2) for rohs compatible products, auo will add rohs for identification. note: the green mark will be present only when the green documents have been ready by auo internal gre en team. (definition of green design follows the auo g reen design checklist.) b. carton label: (tbd) au optronics p460hvn01.1 97.46p05.xxx qty : 4 panel unique id auo internal use xxxxx model no: p460hvn01.1 xxx xxxx manufactured xx / xx made in xxxxx auo internal use week year factory location auo internal use
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 28 / 32 8-2 packing methods: 1pcs module/esd bag 1pcs module/esd bag 1pcs module/esd bag 1pcs module/esd bag cushion top cushion top cushion top cushion top module 4 4 4 4 pcs / 1 carton pcs / 1 carton pcs / 1 carton pcs / 1 carton h tape cushion down cushion down cushion down cushion down cushion set cushion set cushion set cushion set 4 pcs modul 4 pcs modul 4 pcs modul 4 pcs modul es eses es
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 29 / 32 8-3 pallet and shipment information specification item qty. dimension weight (kg) packing remark 1 packing box 4pcs/box 1160(l)mm*375(w)mm*690(h)mm 61 2 pallet 1 1180(l)mm*1150(w)mm*132(h)mm 18 3 boxes per pallet 3 boxes/pallet (by air) ; 3 boxe s/pallet (by sea) 4 panels per pallet 12pcs/pallet(by air) ; 12pcs/pa llet (by sea) 12(by air) 1180(l)mm*1150(w)mm*822(h)mm (by air) 20 1 (by air) 5 pallet after packing 36(by sea) 1180(l)mm*1150(w)mm*2466(h)mm (by sea) 603 (by sea) 40ft hq stretch film label corner angle pet band moisture-proof film corner angle pallet
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 30 / 32 9. precautions please pay attention to the followings when you use this tft lcd module. 9-1 mounting precautions (1) you must mount a module using holes arranged in four corners or four sides. (2) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to module. and the case on which a module is mounte d should have sufficient strength so that external force is not transmitted directly to the m odule. (3) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (4) you should adopt radiation structure to satisfy the temperature specification. (5) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter cause circuit broken by electro-chemical reaction. (6) do not touch, push or rub the exposed polarizer with glass, tweezers or anything harder than hb pencil lead. and please do not rub with dust clothe s with chemical treatment. do not touch the surface of polarizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (7) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. normal-h exane is recommended for cleaning the adhesives used to attach front/ rear polarizer. do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer. (8) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (9) do not open the case because inside circuits do not have sufficient strength. 9-2 operating precautions (1) the device listed in the product specification sheets was designed and manufactured for tv application (2) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage: v=200mv(over and under shoot voltage) (3) response time depends on the temperature. (in l ower temperature, it becomes longer..) (4) brightness of led depends on the temperature. ( in lower temperature, it becomes lower.) and in lower temperature, response time (required time tha t brightness is stable after turned on) becomes longer. (5) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer or electrical contacted parts. and after fading condensation, smear or spot will occur. (6) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (7) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 31 / 32 be done by system manufacturers. grounding and shie lding methods may be important to minimize the interface. 9-3 electrostatic discharge control since a module is composed of electronic circuits, it is not strong to electrostatic discharge. make c ertain that treatment persons are connected to ground thro ugh wristband etc. and don?t touch interface pin directly. 9-4 precautions for strong light exposure strong light exposure causes degradation of polariz er and color filter. 9-5 storage when storing modules as spares for a long time, the following precautions are necessary. (1) store them in a dark place. do not expose the m odule to sunlight or fluorescent light. keep the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that the y be stored in the container in which they were shipp ed. 9-6 handling precautions for protection film (1) the protection film is attached to the bezel wi th a small masking tape. when the protection film i s peeled off, static electricity is generated between the film and polarizer. this should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2) when the module with protection film attached i s stored for a long time, sometimes there remains a very small amount of glue still on the bezel after the protection film is peeled off. (3) you can remove the glue easily. when the glue r emains on the bezel or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-hexane. 9-7 operating condition in pid application (1) if the continuous static display is required, p eriodically inserting a motion picture is strongly recommended. (2) recommend to periodically change the background color and background image. (3) recommend not to continuously operate over 18 h ours a day. (4) recommend to adopt one of the following actions after long time display. i. running the screen saver (motion picture or black pattern) ii. power off the system for a while (5) try not to run the lcd in a closed environment. suitable venting on the system cover would be
p460hvn01.1 product specification rev. 1.3 ? copyright auo optronics corp. 2009 all rights res erved. page 32 / 32 helpful for cooling. (6) it is better to adapt active cooling with fans for long time displaying, especially for high lumin ance lcd model.

▲Up To Search▲

Price & Availability of P460HVN011

	To Download P460HVN011 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .